Metrology & Quality Control

Measure anything – from simple parts to complex assemblies – with FARO's powerful portfolio of 3D inspection and laser projection software.

  • Zeus Engineering chooses CAM2 software to support business growth plans

    Zeus Engineering chooses CAM2 software to support business growth plans

    Learn how Repeat Part Management (RPM) in CAM2 allowed Zeus Engineering to perform 100% inspection through fully-guided routines plus Statistical Process Control (SPC).

    View Material
  • ×

    FREE Trials of Metrology & Quality Control Software

    First Name
    Last Name
    Company
    Country
    State or Province
    Zip or Postal Code
    Primary Software Interest
    GLOBAL_Opt-In
    Access Your Free Trial
    Error - something went wrong!
  • Why migrate from RayTracer to BuildIT Projector

    Why migrate from RayTracer to BuildIT Projector

    Learn why you should consider upgrading your RayTracer software to BuildIT Projector to achieve easier, better and faster laser projection setup and operator workflows.

    View Material
  • What's new with BuildIT Projector 2019

    What's new with BuildIT Projector 2019

    Dive into the new features of the latest release of FARO BuildIT Projector 2019 - the latest release of our modern and intuitive software used to generate and plan laser projection workflows.

    Read Article
  • What's new with BuildIT Metrology 2019

    What's new with BuildIT Metrology 2019

    Dive into the new features of the latest release of FARO BuildIT Metrology 2019 - the latest release of BuildIT's flagship software - elevating the standard for workflow optimization and productivity.

    Read Article
  • "We now do 100% inspection in-house & eliminated need for 3rd party services..."

    Read Quote
  • Measurement software speeds inspection towards Industry 4.0

    Measurement software speeds inspection towards Industry 4.0

    Dive into how CAM2 software seamlessly integrates with the FaroArm to capture actionable data, enable users to perform repeat part management, conduct remote measurements and see results in real-time.

    Read Article
  • Improving inspection speed & accuracy in shipyard operations

    Improving inspection speed & accuracy in shipyard operations

    Read how ACQUIP employs the Vantage Laser Tracker with CAM2 software to quickly provide outage solutions and on-site retrofits for many industries, including power generation, oil & gas and marine.

    View Material
  • ×

    Have a Question? Need Support? Want a Quote?

    First Name
    Last Name
    Company
    Business Phone
    Country
    State or Province
    Zip or Postal Code
    Product Interest
    Primary Goal
    How Can We Help?
    Message - optional
    GLOBAL_Opt-In
    We’ll Respond to Your Inquiry Soon.
    Error - something went wrong!
  • How 3D data is driving new levels of automotive productivity & efficiency18:29

    How 3D data is driving new levels of automotive productivity & efficiency

    Watch this FAROLive! presentation from IMTS 2018 to learn how adopting high-accuracy 3D measurement technology across all plant areas will revolutionize your quality and process inspection.

    Watch Video
  • How to increase throughput with projection-assisted metrology19:07

    How to increase throughput with projection-assisted metrology

    Watch this FAROLive! presentation from IMTS 2018 to learn how high-precision laser projection technology can be used to augment your metrology workflows, with real-world examples. <p>Watch this <stron

    Watch Video
  • How Augmented Reality(AR) is disrupting the manufacturing industry21:00

    How Augmented Reality(AR) is disrupting the manufacturing industry

    Watch this FAROLive! presentation from IMTS 2018 for a practical examination of how Augmented Reality and Mobile Inspection can simplify and streamline production, assembly and inspection. <p>Watch th

    Watch Video
  • Use laser-guided assembly to reduce scrap & rework like Welder Bob1:05

    Use laser-guided assembly to reduce scrap & rework like Welder Bob

    See how changing from older tools to laser templating using a FARO Tracer SI Imaging Laser Projector and BuildIT Projector Software helped Welder Bob increase his throughput.

    Watch Video
  • [TECHSHEET] FARO Tracer SI Laser Projector

    [TECHSHEET] FARO Tracer SI Laser Projector

    The Tracer SI Laser Projector is a 3D projector with advanced laser imaging for guided assembly and in-process verification (IPV).

    View Material
  • [TECHSHEET] FARO BuildIT Projector 2019

    [TECHSHEET] FARO BuildIT Projector 2019

    BuildIT Projector is an intuitive software to generate, plan and operate laser projection workflows, able to create and run laser projection jobs in no time, as well as perform part verification.

    View Material
  • 88% reduced measurement & inspection time by 25-50%...

    Read Statistic
  • [TECHSHEET] FARO BuildIT Metrology 2019

    [TECHSHEET] FARO BuildIT Metrology 2019

    BuildIT Metrology is the industry’s leading large volume metrology software solution for real-time inspection, assembly and alignment applications.

    View Material
  • In-Process Verification using Tracer SI & BuildIT Projector0:48

    In-Process Verification using Tracer SI & BuildIT Projector

    In-Process Verification (IPV) with the Tracer SI and BuildIT Projector will detect the presence/absence of features, evaluate placement and alignment and perform Foreign Object Debris detection.

    Watch Video
  • Explore Our FAROLive! Webinars & Workshops

    Attend an Event
  • Feature-Based Alignment with Tracer SI & BuildIT Projector0:41

    Feature-Based Alignment with Tracer SI & BuildIT Projector

    The Tracer SI Laser Projector with BuildIT Projector Software is the first to fully support Feature-Based Alignment, aligning directly to datums on your assembly with no additional setup.

    Watch Video
  • FARO: Bridging the real & digital worlds to build the truly smart factory

    FARO: Bridging the real & digital worlds to build the truly smart factory

    With so much talk of the “fourth industrial revolution”, are we losing sight of what an intelligent factory should do for the customer, the supplier and for society? FARO’s Denis Wohlfeld explains...

    Read Article
  • [TECHSHEET] FARO Factory Robo-Imager Mobile

    [TECHSHEET] FARO Factory Robo-Imager Mobile

    Factory Robo-Imager Mobile (FRIM) combines optical 3D measurement and robot technology on a mobile station to automate digitization, inspection and verification of parts at any point of production.

    View Material
  • Democratization of Laser Trackers

    Democratization of Laser Trackers

    This whitepaper delves into the advancement of laser trackers for large-scale measurement from just big industrial to more companies, with expanded ease-of-use, lower entry price-points and more.

    View Material
  • [TECHSHEET] FARO CAM2 2018

    [TECHSHEET] FARO CAM2 2018

    CAM2 2018 is the smartest 3D measurement platform and only metrology software in the market to deliver the best integrated FARO hardware experience, intuitive workflow and insightful reporting.

    View Material
  • How to use Optical 3D Imagers & analysis software for automated inspection

    How to use Optical 3D Imagers & analysis software for automated inspection

    This whitepaper dives into the way in which an Optical 3D Imager like the Cobalt can be used in automated inspection to improve speed and repeatability.

    View Material
  • ×

    FREE Trials of Metrology & Quality Control Software

    First Name
    Last Name
    Company
    Country
    State or Province
    Zip or Postal Code
    Primary Software Interest
    GLOBAL_Opt-In
    Access Your Free Trial
    Error - something went wrong!
  • loading
    Loading More...