Leapfrogging vs. pre-defined targets

May 29, 2009

WHITEPAPER:
“Leapfrog” is a technique where reference points are measured with the device in one position and then remeasured after the device has been relocated to a new position. A pre-defined target reference system consists of a set of references that are used for relocation. The position of these targets is established by a separate device capable of large volume measurements. Another measurement device can be placed anywhere within reach or line of sight of the pre-defined targets and can locate itself inside the larger reference frame by simply measuring any set of reference points. 

Previous Material
Laser scanning brings new asset to accident investigations
Laser scanning brings new asset to accident investigations

This case study dives into how laser scanning is helping to improve time, speed and accuracy for forensic a...

Next Material
Portable CMM probes – best practices
Portable CMM probes – best practices

This whitepaper explains portable CMM ball probes, what the options are and a comparison for best practices...

×

Stay Up-to-Date on the Latest 3D Technology Insights!

Primary Goal
Country
GLOBAL_Opt-In
You’re Subscribed!
Error - something went wrong!