Forensic artist helps solve cases by putting the right face on skulls

December 7, 2017

Share this Material
Facebook
Twitter
Email
LinkedIn

CASE STUDY:
Joe Mullins, of the National Center for Missing and Exploited Children (NCMEC), has been leveraging the FARO^® ScanArm to help scan and digital reconstruction skulls to approximate the face of a victim based on the 3D characteristics captured. This allows him to more quickly, easily and accurately identify remains.

Previous Material

Startup to success, Datum Metrology prospers with FARO Laser Trackers [PART 1]

Explore how the versatility and portability of the Vantage Laser Tracker allowed Datum Metrology to cut tim...

Next Material

Focus Laser Scanner used to clarify body-camera film

See how a company that specializes in providing forensic scene visualization and documentation, chose to do...

More Content

ScanArm & CAM2 drive award-winning quality in manufacturing

Forensic artist helps solve cases by putting the right face on skulls

Previous Material

Next Material

More Content

After investing in a Quantum ScanArm and CAM2, Industrial Custom Products achieved 50% faster inspection, cost savings on jigs and up to 70% shorter time-to-market.

Midwest Metrology Solutions gained the ability to inspect in tight locations, greater flexibility and a 50% time savings after deploying a Vantage S6 Laser Tracker with 6DoF.

A maker of large-scale tooling for tier 1 aerospace manufacturers is using multiple FARO metrology solutions to ensure alignment and adherence to tolerances during each stage of their manufacturing.

Implementing a Quantum S ScanArm allowed Brodie International to achieve their inspection accuracy requirements, perform inspections faster, reduce scap and rework and improve customer satisfaction.

Upon deploying a FARO Cobalt Array Imager to perform measurements, this company experienced a significant reduction in first article inspection time and faster time to market.

Learn how tube bending setup and planning efforts can be reduced by as much as 8:1 using a Quantum Arm and Advanced Tubular VTube-Laser software – fast ROI.

This project study focuses on the recent renovation of The Woodruff’s theatre venue, the Alliance Theatre - a $32 million transformation and "masterclass" in design and prefabrication collaboration.

Your ship’s $112,000 bronze propeller has been damaged by ocean debris at night. But fear not, because RAMLAB is here. The Rotterdam Additive Manufacturing Laboratory will print you a new propeller...

See how the truth behind a complex police case, shrouded in mystery unraveled - casting light on the real cause of a road traffic accident and giving victims and their families closure.

See how switching from a total station to a Focus Laser Scanner allowed the Clackamas County Sheriff’s Office to achieve tangible ROI and results.

Cincinnati, Inc. is using a Vantage E Laser Tracker for in-process inspection. They have increased customer satisfaction by 20% and the unit paid for itself within 12 months.

Learn how Repeat Part Management (RPM) in CAM2 allowed Zeus Engineering to perform 100% inspection through fully-guided routines plus Statistical Process Control (SPC).

Learn how Colorado Springs Police Department used FARO to capture a large crime scene in less than an hour, provide the measurements needed to document and present findings in a mass shooting case.

Diverse Dimensions is a full-service dimensional measurement and reverse engineering lab. To provide the highest level of service, Diverse Dimensions uses the FARO ScanArm and Laser Tracker. Using...

Discover how the fabled Cincinnati Music Hall got a much needed renovation, with precise and detailed scans from the Focus Laser Scanner, creating essential as-built digitized documentation.

Read how ACQUIP employs the Vantage Laser Tracker with CAM2 software to quickly provide outage solutions and on-site retrofits for many industries, including power generation, oil & gas and marine.

Dive into this case study to see how manufacturing companies are improving their bottom line with FARO Laser Trackers, making their quality check processes quicker and more cost-effective.

Read how Collision Engineering Associates uses laser scanning to capture more complete, reliable and accurate data from scenes, staying ahead of the competition with the latest 3D technology.

Learn how Woodland Trade Co. uses the Super 6DoF TrackArm to increase accuracy in the measurement of large tools and win new business with Tier 1 aircraft manufacturers.

Learn how Woodland Trade Co. uses the Quantum S FaroArm to increase their accuracy in measurement and win new business with Tier 1 aircraft manufacturers.