CASE STUDY:
Tuftco Corporation, an OEM of carpet tufting equipment, has seen an improvement in their alignment by 80% after implementing FARO® solutions. Measurements that were taken using the FARO Laser Tracker and FaroArm® have led to more consistency in parts, time-savings in rework and assembly, and a more accurate and predictable machine function.
More Content
ScanArm & CAM2 drive award-winning quality in manufacturing
After investing in a Quantum ScanArm and CAM2, Industrial Custom Products achieved 50% faster inspection, cost savings on jigs and up to 70% shorter time-to-market.
Increase speed & profitability with six degrees of freedom
Midwest Metrology Solutions gained the ability to inspect in tight locations, greater flexibility and a 50% time savings after deploying a Vantage S6 Laser Tracker with 6DoF.
Building large tooling with tight tolerances
A maker of large-scale tooling for tier 1 aerospace manufacturers is using multiple FARO metrology solutions to ensure alignment and adherence to tolerances during each stage of their manufacturing.
Industrial producer saves time, reduces scrap & satisfies customers
Implementing a Quantum S ScanArm allowed Brodie International to achieve their inspection accuracy requirements, perform inspections faster, reduce scap and rework and improve customer satisfaction.
Automated inspection of complex parts
Upon deploying a FARO Cobalt Array Imager to perform measurements, this company experienced a significant reduction in first article inspection time and faster time to market.
VTube & Quantum Arm: winning combination for tube measuring
Learn how tube bending setup and planning efforts can be reduced by as much as 8:1 using a Quantum Arm and Advanced Tubular VTube-Laser software – fast ROI.
Theatre reimagined: a technology-driven transformation in five acts
This project study focuses on the recent renovation of The Woodruff’s theatre venue, the Alliance Theatre - a $32 million transformation and "masterclass" in design and prefabrication collaboration.
Printing & certifying AM propellers: The future of large component repair & manufacture
Your ship’s $112,000 bronze propeller has been damaged by ocean debris at night. But fear not, because RAMLAB is here. The Rotterdam Additive Manufacturing Laboratory will print you a new propeller...
Modern-day Sherlock Holmes - 3D scanning meets forensics science
See how the truth behind a complex police case, shrouded in mystery unraveled - casting light on the real cause of a road traffic accident and giving victims and their families closure.
3D laser technology results in savings for interagency investigation team
See how switching from a total station to a Focus Laser Scanner allowed the Clackamas County Sheriff’s Office to achieve tangible ROI and results.
Improving quality & production rates with a laser tracker
Cincinnati, Inc. is using a Vantage E Laser Tracker for in-process inspection. They have increased customer satisfaction by 20% and the unit paid for itself within 12 months.
Zeus Engineering chooses CAM2 software to support business growth plans
Learn how Repeat Part Management (RPM) in CAM2 allowed Zeus Engineering to perform 100% inspection through fully-guided routines plus Statistical Process Control (SPC).
Colorado Springs PD uses Laser Scanner to document mass shooting
Learn how Colorado Springs Police Department used FARO to capture a large crime scene in less than an hour, provide the measurements needed to document and present findings in a mass shooting case.
Creating value for organic growth with 3D scanning technology
Diverse Dimensions is a full-service dimensional measurement and reverse engineering lab. To provide the highest level of service, Diverse Dimensions uses the FARO ScanArm and Laser Tracker. Using...
Cincinnati’s iconic Music Hall receives a laser-scan close-up
Discover how the fabled Cincinnati Music Hall got a much needed renovation, with precise and detailed scans from the Focus Laser Scanner, creating essential as-built digitized documentation.
Improving inspection speed & accuracy in shipyard operations
Read how ACQUIP employs the Vantage Laser Tracker with CAM2 software to quickly provide outage solutions and on-site retrofits for many industries, including power generation, oil & gas and marine.
Increase manufacturing revenues with this three-pronged approach
Dive into this case study to see how manufacturing companies are improving their bottom line with FARO Laser Trackers, making their quality check processes quicker and more cost-effective.
Creating a competitive edge with FARO Laser Scanners
Read how Collision Engineering Associates uses laser scanning to capture more complete, reliable and accurate data from scenes, staying ahead of the competition with the latest 3D technology.
Boeing Supplier of the Year wins jobs with Super 6DoF inspection [PART 2]
Learn how Woodland Trade Co. uses the Super 6DoF TrackArm to increase accuracy in the measurement of large tools and win new business with Tier 1 aircraft manufacturers.
Boeing Supplier of the Year wins jobs with Quantum S FaroArm [PART 1]