Leapfrogging vs. pre-defined targets

May 29, 2009

WHITEPAPER:
“Leapfrog” is a technique where reference points are measured with the device in one position and then remeasured after the device has been relocated to a new position. A pre-defined target reference system consists of a set of references that are used for relocation. The position of these targets is established by a separate device capable of large volume measurements. Another measurement device can be placed anywhere within reach or line of sight of the pre-defined targets and can locate itself inside the larger reference frame by simply measuring any set of reference points. 

Previous Material
ATI Casting Service & FARO on threshold of wind power growth
ATI Casting Service & FARO on threshold of wind power growth

See how ATI Casting Service dramatically reduced time and money spent in production and created new busines...

Next Material
Portable CMM probes – best practices
Portable CMM probes – best practices

This whitepaper explains portable CMM ball probes, what the options are and a comparison for best practices...

×

Stay Up-to-Date on the Latest 3D Technology Insights!

Primary Goal
Country
GLOBAL_Opt-In
You’re Subscribed!
Error - something went wrong!